Télécharger Imprimer la page

CONTINENTAL EDISON CETI2ZFLEX4B Notice D'utilisation page 32

Publicité

Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don‟t touch the heating zones and don‟t put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 5 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
Start up / Stop the booster function :
Action
Zone selection
Increase power
Start up the booster
Stop the booster
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
To stop the cooking time :
Action
Zone selection
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.
Control panel
Press key [
]
Press key [ + ]
Press key [ + ]
Press key [ - ]
Control panel
Press key [
]
Press key [ + ]
Press key [
] during 3s
Press key [ - ]
Press key [ + ]
Control panel
Press key [
]
Press key [
] during 3s
Press key [ - ]
32
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ P ] during 5 min
[ 9 ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 99,98...
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops

Publicité

loading