Publicité
STEP 3: Slide the vertical seat post (5) over the
seat post shell of the main frame (1). Then slide the
seat post holder (8) over the seat post (5). You will
have to loosen and pull the bolts (28) to select and
align the hole to the desired height. Loosen the bolt
and tighten. Then fix the saddle (9) to the bracket (8)
and tighten the screws around the seat.
STEP 4: Slide the handlebar post (6) through the
handlebar housing of the main frame (1). You will
have to loosen the bolt (28) and pull it back, then
select and align the holes for the desired height,
release the bolt and retighten it.
Then remove the bolts and the washer from the
handlebar post (6), connect the handlebar (7) and
the display bracket to the handlebar post (6) with 4
pieces of the M8 spring washer, the M8 washer and
the M8 screw (41).
Install the handlebar cover on the top of the
handlebar post (6), then tighten it with the screw
M5*10 (54).
40
Publicité
