Turning On And Recording Video - Sygonix 1882145 Mode D'emploi

• Save the text file and disconnect the video watch from the
computer.
• Carefully pull out the crown (3) to set the time. Turn the crown
and set the time of the watch. Then push the crown back in
again.
• You can use the video watch as a webcam. The computer
automatically installs the webcam driver when connected to
a computer and the camera can now be used as a webcam.
When used as a webcam, audio is not available.
• For the next connection, it is no longer necessary to install the
webcam driver.
c) Turning on and recording video
• Press and hold the on/off button (2) for 2 seconds. The red and
blue LED power indicator (1) lights up, then the red LED goes
off. The blue LED remains lit.
• The camera is now in video standby mode.
• Press the on/off button. The blue LED flashes three times,
indicating that video recording with sound recording starts.
• The maximum length of a video recording is approx. 10 minutes.
The video ends after 10 minutes. After that, a new recording starts
automatically.
• Press the on/off button twice in quick succession to stop
recording. The blue LED is lit steadily, indicating that the
recording has been saved. The camera is now in video
standby mode.
30