Setup; Charging The Battery - Sygonix 1882145 Mode D'emploi

8. Setup

a) Charging the battery
• Remove the cover crown (7) to expose the USB port. Turn the
crown counter-clockwise.
• Connect the jack plug of the USB cable to the USB port on
the watch.
• Connect the USB-A plug to a free USB port on a USB charger
(5 V/DC 1A) or computer. The red LED is lit steadily and the
blue LED flashes during charging.
• The charging process is completed as soon as the red and
blue LEDs light up steadily.
• Disconnect the USB connection and turn the cover crown
clockwise.
It is recommended to fully charge the built-in
rechargeable lithium polymer battery for the first
5 times. Thus, the rechargeable battery can reach its
future maximum capacity.
Be careful not to lose the crown. It is very small and
can be lost quickly if you are careless. We recommend
keeping the crown in a safe place.
28