Publicité
Electronic Oven Control
BUTTONS
Open
START/+30 sec
START/+30 sec
Settings
STOP/CANCEL
Select/Menu
FEATURE
INSTRUCTION
Hood light
Press Hood light button repeatedly to adjusts the hood light setting among Lo (Low)
(default) -> Med (Medium)-> Hi (High)->Off.
The hood light function can be operated independent
Boost fan
Boost fan button is used to turn on hood fan on the most high level, when boost fan is on,
the
icon will show on the display. The boost fan will last for 10 minutes, then the hood
fan turn to the low level. Press the hood fan button repeatedly can turn off the hood fan.
Hood fan
Press the Hood fan button repeatedly to adjusts the vent fan setting among Lo (Low)
(default) -> Med (Medium)-> Hi (High)->Off.
The hood fan function can be operated independent.
The maximum run time for the hood fan is 4 hours.
NOTE: To keep the microwave oven from overheating, the vent fan will automatically turn
on if the temperature from the range or cooktop below the microwave oven gets too hot.
When this occurs, the vent fan cannot be turned off. The "A" icon and
the display. During auto fan running, you can not turn the hood fan off, but you change the
fan level between High and Medium by pressing the Hood fan button and arrow buttons.
Open the door
Touch the Open button to open the door.
Cooking start
The Start button begins any oven function. If cooking is interrupted by opening the door,
touching Start button after the door is closed again will resume the preset cycle.
Quick start for
On the clock screen, pressing the START/+30 sec button will start the microwave at 100%
30 seconds
power for the time amount of the key pressed. For example, if press START/+30 sec
button four times, the microwave will start a 2 minute cycle at 100% power.
There are several choices under the
maintenance, preferences, connectivity and info.
Instruction:
1. Press the
2. Press Select/Menu button to confirm.
3. Press the "<"or ">" button toggle to the sub-settings.
4. Press Select/Menu button to confirm.
See the Settings section for more detail.
During input
Stop or cancel
cooking
Pressing the STOP/CANCEL button once will clear the input.
function
Pressing the STOP/CANCEL button twice will exit input.
During cooking cycle
Pressing the STOP/CANCEL button once will pause the cycle.
Pressing the STOP/CANCEL button twice will cancel the cycle.
Left arrow
Press the left arrow button to change values, or move between pages, or dismiss the
error and let the display goes back to the clock screen.
Confirm/save
At programming state, press the Select/Menu button to confirm/save the setting and go to
the setting
the next step.
Right arrow
Press the right arrow button to change values, or move between pages, or dismiss the
error and let the display goes back to the clock screen.
button: Remote start, Cleaning and
button repeatedly to select your choice.
Icon will turn on
2
Publicité
