Publicité
pouch or jar of food and replace the lid. Press the defrost functi on butt on
and set the temperature between 25°C-40°C, the default temperature
is 35°C. A� er 30 minutes, the appliance will go into a 40°C keep warm
state. If you want a constant temperature use the Milk Warm-up mode.
When heati ng is complete, press the power butt on or defrost again to
put the unit into sleep mode or unplug the steriliser.
• Sterilisa� on: Pour in the correct amount of water according to the select-
ed programme, then place the bott les on the bott le holder and insert
into the machine. SEE FIG B Press the disinfecti on functi on butt on and
select one of the three modes using the "+" and "-" butt ons.
1. Mode for plas� c bo� les, pour in 100-120 ml of water. Durati on: 18
minutes, the machine heats the water for 15 minutes and the next 3
minutes allow the machine to cool down gently.
2. Mode for silicone bo� les and accessories, pour in 100-120 ml of wa-
ter. Durati on: 20 minutes, the device heats the water for 17 minutes
and the next 3 minutes allow the device to cool down gently.
3. Mode for glass bo� les, pour 120-150 ml of water. Durati on: 25
minutes, the machine heats the water for 22 minutes and the next 3
minutes allow the machine to cool down gently.
• Hea� ng food: Pour in between 100 and 200ml of water, insert the
bott le holder with the tabs to the underside of the FIG C, then insert the
bott le, pouch or jar of food and replace the lid. Press the food warming
functi on butt on and set the temperature between 65°C-75°C, the default
temperature is 70°C. When fi nished heati ng, press the power butt on or
reheat the breastmilk for the unit to go to sleep or unplug the steriliser.
• Timer switch: select one of the functi ons, set the temperature or mode
and then press the "Timer" butt on. Set the ti me between 30 minutes
and 24 hours. The heater will illuminate the set ti me three ti mes and
then start counti ng down. The unit 30 minutes before the end of the
ti me will stop displaying the ti me and will start heati ng so that the food
is ready a� er the ti me set on the warmer. Please note that the appli-
ance will not switch off on its own, use the off /sleep butt on to end the
warming process.
• Night light: You can use the light in both sleep and working modes. Press
the lamp butt on to switch the lamp on. Pressing again will switch the
lamp off a� er 30 seconds. When pressed again, the lamp will switch off
immediately.
The ti me taken to prepare the food will vary depending on the temperature and
the amount of food.
06. CONSTRUCTION OF THE DEVICE
12
Publicité
