Publicité
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured
or mobile home. Your stove is certified to ASTM E1509-12 (2017), and Certified to ULC S627, 2000. This manual
describes the installation and operation of the Home Comfort, CGPS2200, 5790 wood heater. This heater meets the
2020 US Environmental Protection Agency's wood pellet emissions limits for wood heaters sold after May 15, 2020.
Under specific test conditions this heater has been shown to deliver heat at rates ranging from 8,950 to 36,300 Btu/
hr. This heater achieved a particulate emissions rate of 1.0 g/hr and an efficiency of 75%.
Heating Specifications
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Overall: Height X Width X Depth
Weight
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT
WITH THE OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
1.5 lbs./hr. (0.5 kg/hr)
80 hrs. (approximate)
*up to 120 lbs. (55kg)
110-120 volts, 60 HZ, 3.0 Amps
180
346
37.5" (878 mm) X 26" (665 mm) X 27" (688 mm)
245 lbs. (111.1kg)
WARNING:
2
INTRODUCTION
* Pellet size may affect the actual rate of fuel feed, burn
times, and hopper capacity. Fuel feed rates may vary by
as much as 20%. Use PFI listed fuel for best results.
Publicité
