Cleaning and care
4
4.1 Cleaning
1. Unplug the appliance before
cleaning.
2. Wait for the blending shaft (4) to
stop.
3. Use a slightly damp cloth to clean
the exterior of the Motor Body/
Operating Unit (1).
WARNING: Do not
use gasoline, solvent
A
and abrasive clean-
ing agents or hard
brush to clean the
appliance.
WARNING:
careful while clean-
A
ing
shaft (4), it is sharp.
It is not recommend-
ed to wash it in the
dishwasher.
The plastic container
(3) and the middle
C
cover (2) can be
washed in the dish-
washer on the upper
shelf.
12 / EN
Be
the
blending
4. You can remove the rubber gas-
ket that is found at the lower
part of the middle cover (2) and
wash it using some detergent
and lukewarm water. After clean-
ing, fully place it into its housing.
5. Dry all parts of the appliance af-
ter cleaning.
4.2 Storage
• If you do not intend to use the
appliance for a long time, store it
carefully.
• Unplug the appliance before lift-
ing the appliance and its cable.
• Store the appliance in a cool and
dry place.
• Keep the appliance out of the
reach of children.
Chopper / User Manual