Publicité
Step 5
Install Glass Sweep
5A The glass sweep should be
installed on the back edge of the
sliding glass door to form a seal
between the sliding glass door and
the stationary glass door.
Apply glass sweep to a clean dry surface at temperatures above 63°F (17°C).
5B Close the sliding glass door against the Patio Panel. Clean and dry the
back edge of the sliding glass door. Position the glass sweep at the top glass
edge with the flexible part touching the glass of the stationary door.
Carefully peel away the backing and press the glass sweep in place as you
move down to the bottom of the glass. Trim any excess with scissors.
10
5A
www.petsafe.net
Sliding glass door shown here
slightly open
Sliding Glass Pet Door
Install glass sweep here
5B
Publicité
