Panasonic CZ-RTC6BLW Mode D'emploi page 7

Connecting with the "Panasonic H&C Control App"
Before connecting, set Bluetooth
When connecting, try getting the mobile device as close as possible to the remote controller.
1
Start the "Panasonic H&C Control App".
• Remote controllers in the vicinity are displayed on the Home screen.
• Remote controllers that have been paired have "
left.
2
Select the remote controller you want to operate.
„Mobile device
Tap " ".
• If the remote controller is not displayed, slide down to update and the
remote controller is detected.
„ When making a Bluetooth
„ For the second and subsequent Bluetooth
3
Confirm the numbers on the mobile device match
the 6 digits on the remote controller.
• If the numbers do not match, check the remote controller you want to
connect again. (Step 2)
4
Start connecting.
„Mobile device
Tap "Pair".
„Remote controller
Press .
5
Confirm that the Bluetooth
completed.
" " is displayed on the top screen when the Bluetooth
established. Once this step is complete, subsequent connections will be
made automatically.
functionality to [Enable] on the remote controller. (Step 4 on page 6)
®
" displayed to the
® connection for the first time, go to Step 3.
connections, go to Step 5.
®
® connection is
® connection is
Tap
Tap
7