Publicité
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track and Previous
track buttons on your speaker.
3. Press and hold the Fast-forward button or Rewind
button to move through the current track. Release the
button when the desired point is reached.
Note:
● Not all player applications or devices may respond to
all of these controls.
● Some mobile phones may temporarily disconnect from
the speaker when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or
for other reasons unrelated to audio streaming. Such
behavior is a function of the connected device and
does not indicate a fault with the speaker.
● The display will show the track information such as title,
artist, album, etc., when playing in Bluetooth mode.
Playing a previously-paired Bluetooth
source device
The speaker can memorize up to 8 sets of paired
Bluetooth devices, when the memory exceeds this
amount, the earliest device with which the speaker was
paired will be overwritten in the speaker's memory. If your
Bluetooth source device has previously paired with the
speaker, the speaker will still remember your Bluetooth
device and attempt to reconnect with the last connected
device within 1 minute. If the last connected device is not
available, the speaker will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds until "Pairing" is shown on the display to
disconnect with your Bluetooth device or turn off Bluetooth
on your Bluetooth device to disable the connection.
Deleting Bluetooth paired device
memory
To clear the memory of all paired devices, press and hold
the Bluetooth pairing button for more than 7 seconds until
"Reset" is shown on the display.
TRUE WIRELESS STEREO
(TWS) FUNCTION
True wireless stereo (TWS) is a feature that allows one
device to wirelessly connect with another device. You can
use the TWS function to connect it to a second MR014G
and play your music through two speakers.
Setting up the first speaker
1. Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
2. Press the Plus button, the display will show
will flash on the display. Press the Plus button to
ST
enter the "ST Pair" mode. If no buttons are pressed for
10 seconds, the speaker will also enter the "ST Pair"
mode. The display will show "ST Pair".
Setting up the second speaker
1. Make sure the second speaker is in Bluetooth mode
and that it has not connected to a Bluetooth device.
2. Press the Plus button, the display will show
will flash on the display. Press the Plus button to
ST
enter the "ST Pair" mode. If no buttons are pressed for
10 seconds, the speaker will also enter the "ST Pair"
mode.
When the speakers are successfully connected,
will be shown on both displays at the same
L -
ST
- R
time.
Note: Set up the second speaker within 1 minute of the
first one, otherwise the setting of the first speaker will be
canceled.
Starting playback
1. Start playback on the connected Bluetooth device and
adjust the volume on the Bluetooth device or one of the
speakers for comfortable listening.
Note: Volume or EQ settings of one speaker will be
reflected on the other.
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track and Previous
track buttons on either speaker.
3. Press and hold the Fast forward or Rewind button
on either speaker to fast forward or rewind within the
current track. Release the button when the desired
point is reached.
Switching the audio mode
1. Using two speakers, you can switch between
and
R -
ST
- R
2. Press the L/R button on either of the speakers to
change the audio mode.
mode: Both speakers play the same sound.
3.
L -
ST
- R
It is the initial setting.
4.
and
R -
ST
- R
the sound on the right channel, while the other speaker
plays the sound on the left channel for stereo playback
between the speakers.
Disconnecting the TWS Function
Press and hold the Plus button to disconnect the TWS
function.
10 ENGLISH
mode.
L -
ST
- L
mode: One speaker plays
L -
ST
- L
.
ST
MULTI
.
ST
MULTI
,
L -
ST
- R
Publicité
