Publicité
INSTALL SHELF BRACKETS
1. Install the brackets as shown in Fig 4.
2. Tighten all hardware.
INSTALL SHELF
(Optional-Do not install if installing sear box)
1. Install shelf as shown in Fig 5.
2. Tighten all hardware
GREASE BUCKET
1. Hang grease bucket from tube as shown in Fig 6.
ASH CUP
1. Install Ash Cup as shown in Fig 6. Never use grill without
Ash Cup in place.
ASH CUP
UPPER GRATE BKT (2)
PG24ZG-2
M6 X 10 SCREW (4)
FIG. 4
M6 FLANGE NUT (4)
DRIP TRAY
FIG. 5
M6 X 15 SCREW
GREASE BUCKET
GREASE BUCKET
FIG. 6
INSTALL DRIP TRAY
1. Install the Drip Tray as shown in Fig 7 and Fig 8.
FIG. 8
HEAT DEFLECTOR
WARMING RACK AND COOKING GRATE
1. Install the cooking grate as shown in Fig 9.
CLEAN-OUT KNOB ASSEMBLY INSTALLATION
Hand tighten the burner clean-out knob as shown.
CLEAN-OUT PORT KNOB
1. Clean-out Port knob must be pushed in when grill is on.
Make sure pullout lock is pushed down and locks the
knob to prevent inadvertent opening of the clean-out port.
See Fig 10.
FIG. 7
PG24ZG-1
UPPER GRATE(2)
PG24-70
LOWER GRATE(1)
FIG. 9
PG24-9 (1)
BURNER PULLOUT KNOB
CLEANOUT PORT CLOSED
DRIP TRAY
DRIP TRAY
HEAT DEFLECTOR
Publicité
