Publicité
your desired number of minutes appears.
3. The timer will start immediately and your device will display
the time again in a few seconds.
Tips:
•
When the timer is running, you can press the Snooze/Sleep/
Dimmer button to check the remaining time of the timer or
change the time.
•
When the timer is running, you can change all settings of
the radio such as its frequency and volume as described in
other parts of this manual. Changing those settings will not
affect the timer.
•
When the timer ends, your device will return to time display
mode.
•
To end the timer earlier, set the time to "OFF" or turn off the
radio.
4.7.
ADJUST THE SCREEN BRIGHTNESS
To adjust the LED screen's brightness, press the Snooze/Sleep/
Dimmer button to switch between the brightness levels (Low and
High) when your device is in time display mode.
Tip: Your device always sets the LED screen's brightness level
to High after you plug it in.
4.8.
USE THE TIME PROJECTION FUNCTION
Your device can project the time onto the ceiling, so that you can
easily see the time when lying on the bed. The projected time is
more visible when your room is dark.
•
To start or stop projecting the time, press the Time projection
button (
).
•
To adjust the clearness of the projected time, turn the top of
the projection lens holder.
•
To rotate the projected time by 180 degrees, press the
AMS/180° flip button (
•
To adjust the angle of the projection, push the projection lens
holder forwards or backwards.
).
13
EN
Publicité
