Publicité
To perform an automatic search, press and hold the AMS/180°
EN
flip button (
•
Your device will search the entire FM or AM frequency band
for stations and automatically save them as preset stations
one after another.
•
Once the search is complete, your device will tune in to the
first station it found.
•
You may need to perform an automatic search occasionally
to get more stations or improve the reception of existing
stations.
Note: Performing an automatic search will erase all your existing
preset FM or AM stations.
4.4.3.
PERFORM A MANUAL SEARCH
To perform a manual search, press the Hour setting/Tuning down
button (
) or Minute setting/Tuning up button (
to move through the frequency band to select a station when
the FM or AM radio is on. Each time you press the button, the
frequency decreases or increases by 0.05 MHz (FM) or 9 kHz
(AM).
•
To automatically skip to the previous or next station, press
and hold the Hour setting/Tuning down button (
setting/Tuning up button (
•
If the reception is poor, try adjusting the antenna, moving
your device to a different location, or changing the frequency.
•
If you want to keep a station found using a manual search,
follow the instructions in the next section to save it.
4.4.4.
SAVE RADIO STATIONS MANUALLY
You can save up to 10 FM stations and up to 10 AM stations
as preset stations to quickly tune in to them later. Note: Some
preset stations may be created during an automatic search.
1. Tune in to a station that you would like to save.
2. Press and hold the Time/Station setting button (
2 seconds to enter station setting mode. Your device displays
"P" followed by a blinking number.
3. Press the Hour setting/Tuning down button (
setting/Tuning up button (
assign the station to.
4. Press the Time/Station setting button (
and exit station setting mode.
) for 2 seconds when the FM or AM radio is on.
10
) for 2 seconds.
) to select a number (01 to 10) to
) to save the station
) repeatedly
) or Minute
) for
) or Minute
Publicité
