Using; Activating/Deactivating The; Switching The Machine On/Off - BDS Maschinen AkkuMAB 3000 Mode D'emploi

Using

Using
Activating/deactivating the magnetic clamp

Switching the machine ON/OFF

48
CAUTION
►
To prevent the magnet from overheating, switch on the mag-
netic clamp only when the machine is standing on a magnetic
substrate.
‹
Switch the magnetic clamps on (I) or off (O) using the switch
(22).
CAUTION
►
The maximum magnetic clamping force is only available after
switching on the motor.
21
22
‹
Switch the machine on or off by pressing the ON/OFF switch
(21). The indicator light in the switch lights up when the ma-
chine is switched on.
NOTE
►
Allow a severely overheated machine to run on at idle speed
for approx. 2 minutes to cool it down.
►
The machine switches itself off automatically when the battery
capacity is too low.
AkkuMAB 3000