Maintenance; Troubleshooting - Renkforce MX26USB Mode D'emploi

10. Maintenance

Regularly check the safety of the mixer, for example, for damage to the power unit or the housing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately
and make sure it is not unintentionally operated. Pull the power unit out of the socket.
It must be assumed that safe operation is no longer possible if:
• there is visible damage to the device or the power unit
• the device no longer works
• the device has been stored for a long time under unfavourable conditions or
• after the device has been exposed to extraordinary stress caused by transport
Always observe the following safety instructions before cleaning or servicing the mixer:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is
carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations may per-
form repairs.
Apart from this, the device does not need any servicing. The device's outside should only be cleaned with
a soft, dry cloth or a brush.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the
housing.

11. Troubleshooting

By purchasing this DJ mixer, you have acquired a state-of-the-art product which operates reliably.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible faults here:
Please observe the safety notes!
34