Publicité
Page 9
ADJUSTING AIR FLOW:
1.
Swivel the unit If mounted on a single center lag bolt Figure 4a, turn the entire heater and bracket
assembly left or right.
2.
Tilt the unit-Loosen the top Small Knob-Screws and thread into provided holes in heater until tight.
3.
Adjust the louvers in front of the heater as desired. See Figure 5.
SAFETY INSTRUCTIONS:
To start the heater, turn on the circuit breaker. The Power Indicator light will light up to indicate there is
power available. Press the POWER button to turn the heater on. The heater will be in HIGH setting by
default. The heater indicator will illuminate, and the LED display will show the default setting temperature
80°F.
1.
The heater is HOT when in use. Do not let bare skin touch any hot surfaces.
2.
Keep combustible materials (furniture, pillows, bedding, papers, clothes, curtains, and similar
items) at least 3feet (0.9m) from all sides and surfaces of the heater.
3.
Do not use outdoors or in wet areas like bathrooms, laundry areas or where it could fall into a
swimming pool or other container of water.
4.
This heater is a 240V AC rated direct wired appliance. Never use extension cords or relocatable
power taps.
CLEANING THE HEATER:
1.
Do not disassemble the heater to clean it.
2.
The heater should be powered OFF and disconnected from the power at the circuit breaker before
attempting to clean any portion of the heater.
3.
The exterior can be cleaned with a cloth, brush and/or vacuum.
4.
The louvers, fan blade and heating element are delicate and should not encounter hard items. They
can be cleaned by brush, vacuum and mild compressed air.
PORTABLE ELECTRIC HEATER WARRANTY
LIMITED WARRANTY:
A limited warranty is extended to the original purchaser of this heater and warrants against malfunction
due to manufacturing defects for a period of (1) one year from the date of retail purchase. Please read
and follow all details noted below. To register your product please visit www.worldmkting.com
Publicité
