Publicité
Maintenance schedule
Check all external screw connections for tight fit approx. 8 hours after first operation.
Parts
Maintenance jobs
Air filter
Check for external damage and tight
fit.
Check foam and filter insert clean or replace if
necessary.
Fuel
Check tank lid for tightfit, replace if
necessary.
Engine oil
Check oil level, top up if necessary.
Other parts
Check cutting disc for damages and correct tightenning
- change and or adjust if necessary. Pay attention
to the directional arrow on the disc.
Control smooth working of the height adjustment.
Control water supply.
Belts
Check tension and wear – replace if necessary.
Engine oil
First oil change.
Air filter
Clean.
Ignition system
Clean spark plug, check spark plug gap 0,7 mm.
Engine oil
Furhter oil changes.
Valve clearance
Check, set - 0,15 mm intake valve, 0,20 mm exhaust
valve.
T00836GB.fm
20
MAINTENANCE
Maintenance interval
daily
weekly
20 hours
50 hours
100 hours
300 hours
Publicité
