Publicité
OM 0022
9KG INERTIAL MASS WITH SHOCK ABSORPTION
INTRODUCTION
It is compulsory to read this instruction manual before starting any kind of action.
The proper operation and full compliance of this product's performance is guaranteed only if all
the instructions provided in this manual are closely adhered to.
We guarantee that this product complies with the technical specifications described in this manual.
The manufacturer shall not be held responsible for any improper uses other than those described
herein.
Misuse:
• This product should only be used as described in this documentation; any other use is considered
improper.
• The manufacturer accepts no responsibility for any damage caused by the incorrect or
unreasonable use of the equipment.
• Moreover, misuse shall also void the warranty.
Take care of your tools:
• Be sure to store your tools in a clean state.
• Place the tools inside their original package.
COMPONENTS
1 x no-rebound slide hammer with M18x1.5 adapter
1 x adapter internal thread M18x1.5 x external thread M22x2.0
USE
The slide hammer is a high performance drive repair tool for automotive applications. Perfect for
extracting or driving out stuck components and straightening dented or bent bodywork.
The range of possible applications can be increased as required by purchasing optional additional
accessories!
The body of the slide hammer is filled with metal shot.
This prevents the weight from rebounding, absorbing inertia when striking. The impact intensity is
thus increased as the full impact force is transferred to the component being worked on.
This version is also particularly suited for removing suspension arms and allows fast, fatigue-free
work.
Publicité
