GENERAL PRECAUTIONS FOR INSTALLERS
Important safety instructions. PLEASE READ CAREFULLY. • Installation, programming,
commissioning and maintenance must only be carried out by qualified, expert technicians
and in full compliance with the applicable law. • The installer must ensure that the
information for the user, where there is any, is provided and delivered. • Wear anti-static
clothing and footwear if performing work on the circuit board. • Before carrying out any
cleaning or maintenance, disconnect the device from the power supply. • Only use this
product for its intended purpose. Any other use is hazardous. • Came S.p.A. is not liable
for any damage caused by improper, erroneous or unreasonable use. • Only use soft, dry
or slightly damp cloths to clean the device. Do not use any chemical products. • Do not
obstruct the ventilation or heat dissipation vents or slots. • Keep this information. • Do not
expose the LCD screen to direct sunlight. • Install the unit in a position which is suitable
for correctly measuring the room temperature, preferably on an internal wall. Avoid
installing in alcoves, behind doors or curtains, or near heat sources. • Install the device
on a flat surface and do not overtighten the screws.
General precautions for controlling the device remotely
Some features of the system may be managed using smartphones or tablets via the
corresponding apps. For the system to be remotely controlled, the device must be
connected to a home Wi-Fi network with internet access. • This type of system requires a
high-quality Wi-Fi signal to the device to function properly.
Remotely controlling the device via the app uses your smartphone/tablet/home
network's data traffic. The cost of this consumption is borne by the user.