Télécharger Imprimer la page

Livarno Living 323745 1901 Notice De Montage page 7

Publicité

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x table top (1)
2 x frame, vertical (2)
1 x frame, upper (3)
1 x frame, lower (4)
8 x screw, short (5)
4 x screw, long (6)
4 x setscrew (7)
1 x Allen key (8)
1 x assembly instructions
Technical data
Dimensions:
approx. 30 x 40 x 59.8cm (L x W x H)
Maximum load: 5kg
Date of manufacture (month/year):
07/2019
Intended use
The product is designed for indoor use. The
product is not intended for commercial use.
Safety information
Life-threatening hazard!
• Never leave children unsupervised with the
packaging materials. There is a risk of suffoca-
tion.
Risk of injury!
• Make sure the product is properly stabilised
before use.
• Place the product on a level surface.
• The product may only be used under adult
supervision and may not be used as a toy.
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the product or
stand on it. The product can tip over.
• Check the product for damage or wear before
each use. Check regularly to make sure all
screws are tight!
• Never stand or sit on the product.
Assembly
1. Screw the frame of the product together, as
shown in Figure B. Do not completely tighten
the screws initially.
2. Place the table top (1) on a soft, flat surface
with the underside facing up (warning: hard
surfaces can scratch the table top!). Screw
the frame onto the underside of the table top
(Fig. C).
3. Turn the product over and place it on a level
surface (Fig. D). Tighten all the screws on the
frame. For firmer footing of the product, you
can optionally loosen the setscrews (7) to
compensate for uneven ground.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature. Clean only with
water and wipe dry afterwards with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol
– which is meant to reflect the recycling cycle –
and a number which identifies the material.
GB/IE
9

Publicité

loading