Publicité
-
Press the light button to turn the fan's lamp on and off. There are 3 shades available to
achieve the perfect atmosphere in an effective and affordable way.
-
The remote control is powered by 2 x 1.5V-3AAA batteries.
Warnings
-
The remote control operates through RF Wireless digital transmission technology. If both
the fan and the lamp are equipped with a switch, turn on the fan at top speed and turn the
light on before using the remote control.
-
If the fan or the light cannot be controlled through the remote control, check if the batteries
in the remote control are in good conditions and if they make good contact, that the positive
and negative electrodes are in the correct position, and if the batteries are charged.
-
If the fan or the light cannot be controlled through the remote control, check if there are
other remote-controlled appliances in the same area and check if the transmitter buttons
are pressed. Appliances with similar remote-control systems may cause interference.
-
Pay attention to the appliance voltage. Too low a voltage may cause the remote control to
not work. The technical specifications are indicated in this manual.
-
If the remote control is not going to be used for a long time, remove the batteries.
Changing the remote-control battery
The remote control requires 2 x 1.5 V-3 AAA batteries.
1. Open the battery compartment.
2. Insert the batteries into the battery compartment observing the polarity.
3. Close the compartment.
5. CLEANING AND MAINTENANCE
-
Make sure to disconnect the fan before cleaning it.
-
Do not immerse any of the parts of the appliance in water or splash them with any other
liquid.
-
Do not use solvents or any other chemical products for cleaning.
-
Use a soft, damp cloth to clean the surface of the device.
6. TECHNICAL SPECIFICATIONS
Product reference: 08479 / 08480
Product:
EnergySilence Aero 4265 GoldBlack
EnergySilence Aero 4265 GoldWhite
Voltage: 220-240 V
ENERGYSILENCE AERO 4265 GOLDBLACK | GOLDWHITE
ENGLISH
53
Publicité
