Turn the fan head upwards or downwards to
adjust angle of airflow.
7. Height adjustment
Install one or both stand tubes (upper and
lower stand tubes) to adjust the fan height
(see "Installation > "Assemble main body").
8. Replacement of remote control battery
The remote control is powered by a CR2025
button cell. Replace the battery when the
battery depletes.
Find the battery compartment door on the
back of the remote control. Press and hold
the tab (A) and simultaneously pull the
battery tray out (as shown in the figure
below), and place a new CR2025 battery in
the
battery
indicated, then close the battery tray.
tray
with
Page 28 of 30
correct
polarity