Publicité
- Fix the front guard (1)
Position the front guard (1) over the rear
guard (5) while ensuring the marks "I" and
"II" on the front guard (1) are up, and align
the mark "I" on the front guard (1) with the
mark "I" on the rear guard (5).
Then turn the front guard (1) clockwise until
the mark "I" on the rear guard (5) is located
in the center of the mark "II" on the front
guard (1).
Finally tighten the front guard (1) with the
safety screw (14).
USE
Caution:
- Make sure that the product is placed on a
flat and stable floor.
- The power socket must be in the vicinity of
the fan and easily accessible.
Page 25 of 30
Publicité
