Publicité
EN - 6
2. Installation and Initial Setup
This section introduces the unpacking, installation and initial setup instructions
of preparing the Moisture Analyzer for operation.
2.1. Unpacking
Unpack the instrument and the accessories. Check the completeness of the
delivery.
The following accessories are part of the standard equipment of your new
Moisture Analyzer.
• 1 x Box, Aluminum sample pans
• 1 x Pan Holder
• 5 x Glass Fiber Pad
• 1 x Tray Pan
• 1 x Power Cable
• 1 x Pan Handle
• 1 x Quick Guide
Remove packing material from the instrument.
Check the instrument for transport damage. Immediately inform your Ohaus
dealer if you have complaints or parts are missing.
Store all parts of the packaging. This packaging guarantees the best possible
protection for the transport of your instrument.
2.2. Assemble the Instrument
1. Lift the cover straight up and Install the
Tray Pan (A) in the base of the heating
chamber.
2. Install the Pan Holder (C) into position.
Turn the Pan Holder until it engages. In
the locked position, the arm of the Pan
Holder points directly towards the Heating
Unit (E).
3. Place the Sample Pan (D) onto the Pan
Holder using the Pan Handler (B).
The Pan Handler is integrated with draft
shield for optimal measuring performance.
MB92 Quick Start Guide
Publicité
