Publicité
ENGLISH
14. Synchronisation
-
This function is useful when different cooking times have been set for the single basket
compartments and you want frying to end at the same time. With this function, if you have
selected 20 min for the left-hand single basket compartment and 10 min for the right-
hand one, frying in the right-hand single basket compartment will start 10 minutes later to
allow frying in both compartments to finish simultaneously.
-
To programme this function, first select the left (13) or right-and single basket compartment
(17), then select the desired programme (10) or enter the desired time (9) and temperature
(11). Press the 'Sync' icon (14) for it to stop flashing. The other single basket compartment
will start flashing: select the desired programme (10) or enter the desired time (9) and
temperature (11). Press the start/pause icon (12) to start cooking.
-
When this function is activated, the single basket compartment with the shorter
programmed time will enter Standby mode and "Hold" will appear on the display until there
is no time difference. Then, frying will start and both compartments will be left with the
same remaining cooking time.
Note
If you remove the basket, "Out" will be displayed for both single basket compartments. If it takes
more than 90 seconds but less than 5 minutes to place the basket, the sync function will be
deactivated. When the basket is reinserted, a countdown for both single basket compartments
will start.
15. Preheating
-
With this function, preheating will start in the single basket compartment of choice, i.e., the
left-hand compartment, the right-hand one or both.
-
To select this function, first select the compartment or basket (13, 16 or 17) to be used, then
select the preheating function (15) and set the desired preheating temperature (11). The
preheating time is 5 minutes by default, but if you wish to cancel it at any time, press the
power icon (8).
-
Once preheating has finished, press the icons 13 or 17, depending on the preheated single
basket compartment, and press the programme (10) or set the desired time (9) and
temperature (11) manually and next, press the Start/Pause icon (12).
16. Dual setting (L=R)
-
This function is used to apply the same setting to both single basket compartments, that
is, if you press this icon and then the "chips" programme, this setting will be applied to both
compartments.
-
To use it, first select one of the compartments (13 or 17) and set the desired time (9) and
temperature (11) or programme (10) and then press this function (16). Next, press the
Start/Pause icon (12) to start cooking.
54
CECOFRY DUAL 9000
Publicité
