Press the ~ button (you're using the "shot of steam" function vertically).
3.
4.
Leave 4 seconds between shots, to let the temperature build up.
AFTER USE
1.
Set the temperature control to •. Set the steam control to S.
2.
Unplug the iron.
3.
Open the cover.
4.
Hold it over a sink, turn it upside down, and drain the water from the reservoir, via the water inlet.
5.
Close the cover.
6.
Sit the iron on its heel.
7.
Leave it to cool down completely.
8.
When it's cold, wipe off any moisture, and wind the cable round the heel.
9.
Store the iron on its heel, to avoid corrosion and damage to the soleplate.
10. Clean the outside surfaces of the appliance with a damp cloth.
11.
Remove spots from the soleplate with a little vinegar.
SELF CLEAN
To avoid scale build up, use the self clean function at least monthly in normal water areas, more often in
hard water areas.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
You'll need a basin or a large bowl to catch the water coming out of the soleplate.
1.
Fill the reservoir to the max mark.
Set the temperature control to max. Set the steam control to S.
2.
3.
Sit the iron on its heel.
4.
Put the plug into the power socket and wait till the light goes out.
5.
Hold the iron over the basin or bowl with the soleplate down.
6.
Press the C, and hold it down.
7.
Gently move the iron to and fro, over the basin or bowl.
8.
Water and steam will wash scale and dust through the soleplate, and into the sink.
9.
When the reservoir is empty, release the C button.
ANTI-SCALE
The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
Don't use a descaling solution, or you'll destroy the anti-scale agent.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal
waste, but recovered, reused, or recycled.
23971-56 versa iron IB T22-5004026.indd 5
5
26/07/2017 13:34:37