Starting Up And Operation Of Capturs Model C - Capturs MODEL C Guide D'utilisation

Starting up and operation of Capturs
Model C
● If the battery is not already inserted in the tracker refer to the paragraph
"Install or change the battery".
● Operating the tracker : go to https://connect.capturs-systems.com or
download the mobile application on https://capturs.com/app. Create an
account and go "My Devices" to integrate your Capturs Model C tracker.
Use the serial number (S/N) and the activation key (Key) written on the
sticker on the device to add your tracker on your account. Follow the
instructions on the FAQ to use the trackers, parameter alerts, download
reports on the online interface.
● Starting the tracker : If the battery is inserted the tracker will be
automatically started. If a tab is mounted on the tracker with the
mention "remove to start" or "remove to start tighten the 4x screews
before use" according to the model, pull the tab gently and slightly
tighten the 4 screws to close the enclosure properly.
● Before the final installation/attachment of the Capturs Model C tracker,
position it outdoors, with the label facing the sky, for 5 minutes. This will
allow the tracker to receive its first GPS position.
● Stopping the tracker : Remove the battery to stop the tracker. Refer to
the paragraph : "Install or change the battery".
Important : GPS is a sensitive technology. Indoor GPS cannot work. When it
has not been used outside for more than 4 hours, the first acquisition will take
longer. You should do it without moving because when moving it will take even
longer. Before going out, you should stay still outside for 5 minutes.
CAPTURS SAS - 819 072 570 R.C.S. Toulouse 425 Rue Jean Rostand 31670 Labège +33 6 73 18 19 36 – contact@capturs.com – © CAPTURS 2021
9