Mount And Fix The Tracker - Capturs MODEL C Guide D'utilisation

Mount and fix the tracker
The tracker Capturs Model C has 2 holes protected by a small cover.
●
Open the cover and use the holes to fix the tracker to the desired
support with screws or bolts.
Other fixing systems are possible (double-sided tape, magnet...), here
●
are some examples below. These accessories can be purchased
separately.
At a height of more than 2 m from the ground it is imperative to use a
●
screw fastening adapted to the support to avoid the risk of falling on
someone.
Mount the Capturs Model C tracker either flat or with the antenna facing
●
upwards (the position of the antenna corresponds to the position on the
sticker).
The enclosure:
CAPTURS SAS - 819 072 570 R.C.S. Toulouse 425 Rue Jean Rostand 31670 Labège +33 6 73 18 19 36 – contact@capturs.com – © CAPTURS 2021
10