Install Or Change The Battery - Capturs MODEL C Guide D'utilisation

Install or change the battery

Warning: only use 3 Volts Panasonic Industry CR123A Cylindrical‐type Lithium
Battery standard type or equivalent. These batteries are non rechargeable.
Carefully check that the battery is suitable for this use before inserting in
Capturs Model C.
To install or change the battery:
Make sure you are in good condition to perform battery change (not
●
exceeding temperature usage range, no water on the case, the battery or
the operator's hands.
Remove the 4 screws using a proper screwdriver :
●
If already inserted remove the old battery and recycle in accordance
●
with the applicable recycling instructions in force in your country.
CAPTURS SAS - 819 072 570 R.C.S. Toulouse 425 Rue Jean Rostand 31670 Labège +33 6 73 18 19 36 – contact@capturs.com – © CAPTURS 2021
14