Télécharger Imprimer la page

Inventum IVK85WIT Mode D'emploi page 18

Publicité

9
reversing the door opening
It is possible to change the door opening from either the left or
the right side. To change the opening direction, please follow
these instructions.
Note: Before reversing the door swing, set the thermostat off
to [ 0 ] and unplug the appliance from the mains. Empty the
appliance, including the shelves before reversing the door
opening.
• Remove the cover plates [1] and the screws [2].
• Lift the top panel [3] and the cover plate [4] of the appliance.
• Remove the top hinge, the screws [5] and the hinge [6].
• Remove the door by carefully lifting it from the bottom hinge.
Put the door in a safe place.
• Remove the plug [7] from the top of the door and place it on
the opposite side.
• Remove the screws [8] and the bottom hinge [9].
• Unscrew the adjustable leg [10] and place it on the opposite
side.
• Place the bottom hinge [9] on the opposite side with the
screws [8]. Also place the adjustable leg at the right position.
• Place the door against the appliance and make sure it is well
fitted on the bottom hinge.
• Place the upper hinge [6] on the opposite side with the
screws [5].
• Place the cover plate [4] on the opposite side in the top panel
[3].
• Place the top panel [3] and fit it with the screws [2]. Refit the
cover plates [1].
• Make sure the door is alligned with the outside of the
appliance.
• Level the appliance with the adjustable legs.
• Leave the appliance to stand for at least 3 hours before
you insert the plug into the socket.
reversing the door opening of the freezer -
only applicable for model BKV500
• Open the door of the freezer compartment a little. Using a
small screwdriver, press the spring in the opening of the lower
door bearing and remove the door.
• Place the covering cap [M] on the opposite side.
• Turn the door of the freezer compartment 180 degrees and
fit the lower door bearing into the lower door bearing cavity of
the freezer compartment door.
• Fit the door in the upper door bearing and at the same time
insert the lower door bearing into the square hole.
18
English
All manuals and user guides at all-guides.com
socket driver
cross shaped screwdriver
thin-blade screwdriver
1
2
3
4
9
8
10
5
6
7

Publicité

loading

Ce manuel est également adapté pour:

Ivkv85witIvvr85wit