Publicité
FITTING FURNITURE BOARD
TO APPLIANCE DOOR
Place the mounting bracket on furniture board and position it accord-
ingly (Fig. 12). The distance between the furniture board and the un-
derside of the worktop should be 5 mm (Fig. 13). Attach the mounting
bracket using suitable screws supplied in the installation kit. Pull out
the mounting bracket cover and screw in the two special screws (2)
in the appliance doors(Fig. 14). Attach furniture board with the fixed
mounting bracket to the appliance door. Secure the furniture board with
suitable nuts (item 3, Figure 14). Make sure the furniture board assem-
bly is positioned correctly relative to the appliance (Fig. 15). Using the
supplied screws, attach the furniture board assembly to the bottom of
the appliance door (Fig. 15). Replace the mounting bracket cover in its
original location.
- 27 -
Publicité
