Polar G590 Mode D'emploi page 4

EN
Installation
Note: Not for use in vans or trailers, food trucks or similar vehicles.
Note: If the unit has not been stored or moved in an upright position, let it stand
upright for approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces.
2. To optimize performance and longevity, ensure a minimum clearance of 2.5cm is maintained between
the unit and walls and other objects, with a minimum 20cm clearance on the top. NEVER LOCATE
NEXT TO A HEAT SOURCE.
Note: Before using the appliance for the first time, clean the shelves and interior
with soapy water then dry well.
3. Set the brakes on the castors to keep the appliance in position.
Reversing the door (G590/G591 only)
Depending on the location of the appliance, it may be necessary to change the direction the door opens
by changing the side of the door handle.
To reverse the door handle:
1. The door handle is on the left side. Disassemble the right lower hinge and left lower hinge.
2. Use the spare hinge provided and secure it on the L/H side.
4
G590-G591_GD879-GD880_ML_A5_v17_20240402.indb 4 G590-G591_GD879-GD880_ML_A5_v17_20240402.indb 4 2024/4/3 10:25 2024/4/3 10:25