SEB BeerTender VB215700 Mode D'emploi page 19

You cannot The BeerTender
position the tap Keg tap or tube is
cover correctly. not inserted
correctly.
No beer is The BeerTender
being Keg is empty.
dispensed.
There is no keg
inside the
BeerTender
appliance.
The BeerTender
appliance tap
handle is not
correctly
installed/positioned.
You cannot The tap cover has
close the lid. not been
positioned
correctly.
The The BeerTender
BeerTender Keg has not
appliance reached the right
produces too dispensing
much foam temperature.
when
dispensing beer
(see also
section 7:
Dispensing
beer).
The BeerTender
Keg has been
shaken.
The tap handle is
being moved too
slowly.
Beer flows out The tap handle is
too slowly. not open all the
way.
19
Remove the
BeerTender Keg
tap from the
appliance and fit it
again following
section 6: Using
the BeerTender.
Replace the
BeerTender Keg
with a new one.
Install a keg inside
the BeerTender
appliance.
Install/position the
tap cover correctly.
Position the tap
cover correctly.
Allow the
BeerTender Keg to
cool to the right
temperature. You
can rely on the
temperature
indicator on the
control panel of
your BeerTender
appliance.
Wait 4 hours
before dispensing
beer.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Open the tap
completely.