Publicité
Les langues disponibles
Les langues disponibles
Characteristics of your DMC 3000
•
•
•
•
•
•
Caring for your DMC 3000
When the battery starts to approach the end of its life, the DMC 3000
will display an alert message, and in run mode is coupled with periodic
flashes of the LED and chirps of the speaker.
The battery can be changed by removing the two Torx screws (Torx n°8,
ISO14583) on the back cover and replacing it with a single (1.5 V) AAA
alkaline battery.
For more inform
the DMC 3000 refer to the User's Guide 151153EN.
See User's Guide DOC003284 for Hp(0,07) beta module.
See User's Guide DOC003285 for Hp(10) Neutron
module.
See User's Guide 15-00100 for telemetry module.
154796-D
Energy range (X-ray and
gamma) from 15 keV to
7 MeV
Energy response better than
± 20% (Typically ± 10%)
from 16 keV to 7 MeV
Display units: mSv, μSv,
mrem
Dose measurement display
range: between 1 μSv and
10 Sv
Rate measurement display
range: between 10 μSv/h
and 10 Sv/h
Optional extended rate
display between 1 μSv/h and
10 Sv/h
ation about the use and maintenance of
•
2 dose alarms (*) and 2 dose
rate alarms (*),
(*) including 1 acknowledgeable
(pre-alarm indicator)
•
9 months of battery life (**)
under typical use (in run
mode 8 hours a day, 5 days
a week)
•
2,500 hours of battery life in
continuous run mode (**)
(**) excluding alarm excess
(< 0.2% of the time in alarm)
•
Waterproof: 1 meter, up to
1 hour
•
Shock and drop resistant
(1.5 meters on concrete)
In run mode, once the battery gets
low, the DMC will also display
remaining hours of battery life.
- 16 -
Publicité
