MIRION Technologies DMC 3000 Guide D'utilisation page 14

Setting Alarms for your DMC 3000
1.
2.
3.
4.
5.
6.
7.
8.
9.
*Rate Alarm setting used for this example
**Press to change the value up or down in single increments.
Hold to rapidly change the value up or down.
154796-D
From pause mode, press and hold
-
the ' ' button for 3 seconds
The display will change to 'Set Thr'
Rapidly release the '
+
the ' ' button"
The DMC 3000 will enter programming
mode
-
Press the ' ' button until you reach the
parameter to be changed*
+
Press ' ' to start modifying the selected
parameter. (display blinks)
+
Press or hold** ' ' or '
the threshold value, respectively
Wait for 5 seconds for the DMC to return
to step 4
Wait 10 seconds more for the DMC to
return to pause mode
-
' button, and press
-
' to raise or lower
- 14 -