MIRION Technologies DMC 3000 Guide D'utilisation page 13

Turning on your DMC 3000
1.
From pause mode, press and hold
the '+' button for 3 seconds
2.
The display will change to 'Enter'
3.
Rapidly release the '+' button, and
press the '-' button
4.
After a beep and LED flash the unit
will be in run mode
Turning off your DMC 3000
1. Press and hold the '+' button
for 3 seconds
2.
The display will change to 'Exit'
3.
Rapidly release the '+' button, and
press the '-' button
4.
After a beep and LED flash the unit
will be in Pause mode
In Pause mode, depending on its configuration, the dosimeter can
display: PAUSE, wearer name, calibration, due date,
user message
- 13 -
154796-D