Plein Air PI-3500 Mode D'emploi page 17

1. Power On
a) When power on, the buzzer alerts, all LED display and indicators glisten one time and disappear, the
cooker enters into power on condition.
2. Switch On
a) After power on, press "On/ Off Button" for 2 seconds, "On/Off LED" keeps consistent on, the cooker is
ready for working.
b) After switch on, press "Function Button" to choose power heating function or temperature heating
function.
c) If the function power is active, "Power LED" will be on, ("Temperature LED" will be on).
d) Press "Decrease Button" or "Increase Button" to start to heat.
e) The cooker will return to the state of power on if without any operation within 10 seconds after switch on.
3. Switch Off
a) When in working or switch on, press "On/ Off Button", the cooker will stop working and enters into power
on condition.
4. Timer
a) Time range from 5 minutes to 180 minutes.
b) After switch on, press "Function Button" to choose "Timer LED", "Timer LED" starts blinking, the LED
display screen shows "0". Press "Increase Button" or "Decrease Button" to increase or decrease the time
with every step of 1 minute. Keep pressing "Increase Button" or "Decrease Button" to increase or decrease
with every step of 10 minutes. It will be automatically confirmed in 5 seconds after you set the time, the
LED display screen keeps consistent on.
c) The cooker will cancel the timer automatically when the LED display screen shows "0" if without any
operation within 5 seconds.
d) In the mode of timer, the LED display screen will shows power/temperature and remaining timer
alternately every 5 seconds.
e) After timer finishes, it returns to power on.
Press "Function Button" again to cancel the timer function.
f)
5. Function Button
a) Press "Function Button" to choose power / temperature heating function and timer setting.
b) Press "Function Button", the relevant function will be chosen according to the below order: power heating
function, timer, temperature heating function, timer, power heating function, etc.
6. Power Heating Function
a) When in switch on or other cooking modes, press "Function Button" to choose power heating function.
"Power LED" keeps consistent on, the default heating power of left hob is 1200W (the right one is 1000W),
the LED display screen of left hob shows "1200" (the right one shows "1000").
b) Press "Decrease Button" or "Increase Button" to decrease or increase the power.
c) Timer is available, after you set the power, press "Function Button" to choose "Timer LED" and then to
set the time according to the directions of timer setting.
d) In the mode of timer, the LED display screen will show power and remaining time alternately every 5
seconds.
7. Temperature Heating Function
a) When in switch on or other cooking modes, press "Function Button" to choose temperature heating
function. "Temperature LED" keeps consistent on, the default heating temperature of left hob is 240℃
(the right one is the same), the left LED display screen shows "240" (the right one is the same).
b) Press "Decrease Button" or "Increase Button" to decrease or increase the temperature.
c) Timer is available, after you set the temperature, press "Function Button" to choose "Timer LED" and
then to set the time according to the directions of timer setting.
d) In the mode of timer, the LED display screen will show temperature and remaining time alternately every
5 seconds.
8. Max or Min Power / Temperature Shortcut Button
a) When in the mode of heating, press "Max Power / Temperature Shortcut Button", the cooker will heat at
the max power or the max temperature.
b) When in the mode of heating, press "Min Power / Temperature Shortcut Button", the cooker will heat at
the min power or the min temperature.
DT Istr (PI-3500) 10/17_Rev. 1
PI-3500
17/25