General Warnings; Suitable Cookware; How To Operate - Plein Air PI-3500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16. This appliance is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, offices and others working
environments;
- farm houses, bed and breakfast type environments.
- by clients in hotels, and other residential type environments.
1. Remove all the packaging material and make sure that the appliance is in good condition. If you have any
doubt, do not use the appliance and contact our After-Sales Service, Keep the packaging material (staples,
nylon bags, etc.) out of the reach of children. Before turning the plate on, check that the voltage and frequency
of the power socket are compatible with those indicated in the product technical plate.
2. This appliance must be connected to an approved mains socket that complies with the safety regulations on
electrical systems for civil purposes. The electrical system must be specific for the appliance rated voltage
and must be equipped with an earthing cable.
3. The appliance must be used only for its intended use, that is, as an electric plate. Any use other than its
intended purpose shall be deemed to be improper and hazardous.
4. Do not introduce objects into the appliance.
5. The manufacturer shall not be held responsible for damages derived from misuse of this appliance, do not
assuming any responsibility in case of incorrect use that will decline any warranty.
6. The appliance has dangerous components that must be kept out of the reach of children.
7. The power cord must never be in contact with the hot surfaces of the plate.
8. Never use this device near curtains, inflammable material, furniture, etc.
9. Do not lay the power cord under a carpet. Do not cover the power cord with a cover or similar elements. Pay
attention not to place the power cable where it is likely to get into people's way.
10. Never connect the power cord to extensions or triple plugs. Do not pull or damage the power cord. Before
any maintenance operations, disconnect the plug from the mains socket.
11. If the appliance does not work properly, immediately turn off the electric plate and disconnect the appliance
from the mains socket. For repairs, contact a technical support centre authorised by the manufacturer, and
require that original spare parts be used. Using parts that do not conform to the product may seriously
compromise its correct operation.
12. Never submerge the product in water.
13. In order to unplug the appliance, select « 0 » and disconnect the plug from the power socket.
FEATURES
Whilst standard hotplates heat up themselves, in an induction hotplate the heat is created in the base of the
cookware. The hob itself does not heat up; it becomes hot when food is heated upon it in a pan and the heat from
the pan reflects onto the hob. (Reverse heating). This is caused by an energy field that generates heat only in
magnetically conductive materials, for example, pans made of iron. In other materials, such as porcelain, glass or
ceramic, the energy field cannot generate any heating effect.

SUITABLE COOKWARE

Only use cookware that is suitable for induction hobs:
Suitable cookware consists of pots and pans with a base made of steel or cast iron. You can identify these either
by means of the markings on the pan or by ascertaining whether a magnet clings to the base of the pan.
Unsuitable cookware is made from any kind of metal that is non-magnetic, such as aluminum, copper and
stainless steel, as well as non-metallic vessels made of porcelain, glass, ceramic, plastic, etc.
Thin pan bases are better suited to induction cooking than thick sandwich bases. The very short response times
to setting modifications (short preheating period, rapid and controllable browning) are not possible when pans
with thick bases are used.
Only use cookware that is suitable for the size of the hob. This the only way to ensure that the induction hob
functions perfectly. The base of the pan may not be uneven, rather, it must sit flat.
The diameter may not be less than 10 cm to ensure that the energy field has an effect. Do not use pans with a
diameter in excess of 26 cm.

HOW TO OPERATE

1
2
DT Istr (PI-3500) 10/17_Rev. 1
4

GENERAL WARNINGS

PI-3500
1
15/25

Publicité

Table des Matières
loading

Table des Matières