Publicité
Verifications for anchor devices according to the Standards EN 795:2012 "Personal fall protection
equipment – Anchor devices", CEN/TS 16415:2013 "Personal fall protection equipment – Anchor
devices – Recommendations for anchor devices for use by more than one person simultaneously"
and UNI 11578:2015 "Anchor devices intended for permanent installation" and for rigid anchor
lines equipped with a guided type fall arrester according to the Standard EN 353-1:2014 + A1:2017
"Personal fall protection equipment – Guided type fall arrester including an anchor line – Part 1:
Date:
Applicant:
Note 1: The Certificate of Conformity loses its validity if any modifications are made as compared with the original and tested product.
Note 2: Dolomiticert only allows partial disclosure of the present Certificate of Conformity upon written authorization.
Note 3: This Certificate of Conformity issued by Dolomiticert under a voluntary basis.
Note 4: Standard requirements applicable to the Product but not evaluated by Dolomiticert are outside the scopes of the present
Certificate of Conformity.
Note 5: The present Certificate of Conformity deletes and substitutes the Attestation of Conformity number 220308 issued in
date 24/03/2022.
Note 6: The present is the English translation of the Certificate of Conformity number 230430 issued in date 12/04/2023.
44
DÉCLARATION DE CONFORMITÉ
Address: Villanova Zona Industriale, 7/A
32013 LONGARONE ( BL ) - ITALY
Tel.: +39 0437 573407
Web site:
www.dolomiticert.it
CERTIFICATE OF CONFORMITY
Guided type fall arrester including a rigid anchor line"
Anchor device and rigid anchor line
Binario R27 LongSpan
Responsible for the evaluation
HARKEN ITALY SPA
Via Marco Biagi, 14 – 22070 LIMIDO COMASCO CO – Italy
Fax: +39 0437 573131
E-mail:
info@dolomiticert.it
number 230431
Model:
th
12
of April 2023
Luca Tamburlin
FRANÇAIS
Page 1 / 7
Firmato
digitalmente da
TAMBURLIN LUCA
Data: 2023.04.12
14:31:53 +02'00'
12/04/2023
Publicité
