FUNCTIONS
2
1
FRONT & BACK PANELS
1. SPRAY NOZZLE
Fog spray emits from this nozzle during operation,
do not touch the unit during operation or during
a period of cool down after operation, as it gets
very hot.
2. FLUID RESERVOIR AND HOSE
Loosen the cap to fill fluid into the unit. Do not
pinch the hose at any point, which may cause
breakage to or impede movement down the
hose.
3. POWER SWITCH
Toggle this switch to power the unit on or off
when the unit is powered on, the switch will
illuminate.
INPUT POWER: 230VAC, 50/60Hz
FUSE: F4A / 250V
4. REMOTE CONTROL SOCKET
Insert the remote control into this input
WARNING - This is a mains powered output and
only the remote control should be inputted into
this socket.
5. MAINS SOCKET
Insert only the supplied IEC mains cable into this
socket. The socket also contains an integral fuse. If
replacing the fuse, ensure the unit is disconnected
from the mains power and only insert the same
rated fuse as was in the unit previously.
10
REMOTE
CONTROL
3
4
5