Cleaning The Filter - Gtec MULTI ATF047 Manuel D'utilisation

Emptying the bin
There's no latch, the bin just pulls off.
It's easier if you wiggle it as you pull it.

Cleaning the filter

Remove the filter by pulling it from the top
of the bin. Tap the dirt from the filter and tip
any dirt from the filter housing. Wash the
filter if necessary.
38
Hold the Multi's bin over your rubbish bin and
release the latch to empty the dirt. A gentle
tap will help. Remove the filter and tap each
time you empty the bin.
Wash the filter under a tap, squeeze it out
then let it dry completely before using it.
Never put the bin back without the
filter inside. You could damage the
motor.