Publicité
Les langues disponibles
Les langues disponibles
V1.0
MENU 11.
Function: Turn Off Time
This is the delay in seconds between shutting off the engine and when the GPS
Speedometer display shuts off.
MENU 12.
Function: Factory Reset
Change the default setting from zero (0) to one (1), This will remove all changes
to the entire menu and reset it back to the factory setting.
Press and holding the Mode (N) button for 3 seconds to save the reset and exit
from the menu.
An alternate method if this does not work is to unplug the USB Mini-B
connector from the GPS unit. Press and hold down the Mode button and plug
the connector back into the unit to reset it.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when
servicing.
3.
Keep the tool clean, dry and free from oil/grease at all times.
4.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
5.
Disconnect the GPS unit from the vehicle if the vehicle will not be used
for a week or longer. The GPS unit will last a month on stand-by,
drawing from the vehicle battery. Disconnecting the GPS unit will stop
the standby function from draining the battery.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
Visit www.princessauto.com for more information
GPS Speedometer
Range: 5 to 300
Range: 0 to 1
Default Screen Value: 20
Default Screen Value: 0
9198789
9
Publicité
