Power Fist 9198797 Mode D'emploi page 8

9198789
MENU 6.
Function: Fatigue Driving
Reminder
Alarm sounds when the vehicle has been in motion for longer than the set
value. The value is the number of hours before the alarm will sound.
Driving fatigue can reduce mental and physical performance. The alarm
encourages the driver to stop and exit from the vehicle for a short break to
reduce the effects of fatigue.
MENU 7.
Function: Brightness Level Range: 0 to 11
Adjust the brightness of the LED projection display.
Zero (0) is an automatic setting. The unit will change the brightness based
on the amount of light shining on the light sensor (K).
Increasing the range from 1 to 11 will override the light sensor and increase
the brightness.
MENU 8.
Function: Speed Unit
Select the speed unit. Select zero (0) for km/h and select one (1) for MPH.
MENU 9.
Function: Water Temperature Unit Range: 0 to 1 Default Screen Value: 0
Select the water temperature unit. Select zero (0) for Celsius (ºC) and select one
(1) for Fahrenheit (ºF).
MENU 10.
Function: Turn-off Voltage
The GPS speedometer automatically turns off when the vehicle power is no
longer running. When the speedometer fails to shut down, set the voltage to
13.2V. Keep resetting the upper limit until the speedometer shuts down.
Set the voltage to 1.0V for gas/electric hybrid vehicles or vehicles equipped
with start/stop technology to prevent the speedometer from shutting down
while stopped.
Also check Menu 11 to ensure the turn off time number is not too high.
8
GPS Speedometer
Range: 1.0 to 8.0 Default Screen Value: 4.0
Range: 0 to 1
Range: 0 to 15.0
For technical questions call 1-800-665-8685
Default Screen Value: 0
Default Screen Value: 0
Default Screen Value: 0
V1.0