Using An Actuator From The Menu (Art. 1256); Viewing Images From Remote Cameras (Art. 1259C) - Comelit Group FT PLANUX 03 Manuel D'utilisation Et De Programmation

2.12 Using an actuator from the menu (Art. 1256)

PLANUX
INTERCOM
ACTUATORS
VIDEO CAMERAS
HANDS FREE
SETTINGS
KEYPAD LOCK
ACTUATORS
GENERIC ACTUATOR
ACTUATOR 1
ACTUATOR 2
ACTUATOR 3
RENAME HEADINGS
The monitor will beep to confirm activation. If no remote
camera is connected, the text DEVICE NOT FOUND will
appear on the display.
DEVICE NOT
FOUND
To rename the actuators, see point 3.5.
FT PLANUX 03

2.13 Viewing images from remote cameras (Art. 1259C)

PLANUX
INTERCOM
ACTUATORS
VIDEO CAMERAS
HANDS FREE
SETTINGS
KEYPAD LOCK
The image from the external unit appears on the screen.
VIDEO CAMERAS
VIDEO CAMERA 1
VIDEO CAMERA 2
RENAME HEADINGS
VIDEO CAMERAS
VIDEO CAMERA 1
VIDEO CAMERA 2
RENAME HEADINGS
By pressing repeatedly, you can switch between the
various cameras in the selected group and the external unit
Press repeatedly to exit the menu and view the image
from the camera on the full screen
If no remote camera is connected, the text DEVICE NOT
FOUND will appear on the display
To rename the cameras, see point 3.5
23 FT PLANUX 03