Publicité
Les langues disponibles
Les langues disponibles
No
Code
11
LC
12
OC
13
PC
14
PC1
15
Ub
16
Ur
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
WA8600M_DC68-03774C-04_EN.indd 59
Check the drain hose.
•
Make sure the end of the drain hose is positioned correctly.
•
Make sure the drain hose is not clogged.
•
Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
NOTE
When the washer displays "LC", the washer do draining for 3
minutes. During this time, the POWER button is inoperative.
Water overflowed.
Restart after spinning.
•
Turn off the washer, unplug it, wait one minute, and then plug
•
the washer in again. If the information code remains, contact
a Samsung customer service center.
When position of the clutch can't be detected.
•
Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
After position of the clutch is detected, if the signal from the hall
clutch hall is incorrect.
•
Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Spinning does not work.
•
Make sure laundry is spread out evenly.
•
Make sure the washing machine is on a flat, stable surface.
Redistribute the load. If only one item of clothing needs
•
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "Ub" check message
will appear in the display.
Display for additional rinsing.
•
Show additional rinsing in sensing unbalance.
•
Method of releasing the display.
•
Any key input.
Meaning
English 59
2019-02-14
5:36:33
Publicité
