Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Problem
Vibrates excessively or
makes noise.
Stops.
54 English
WA8600M_DC68-03774C-04_EN.indd 54
•
Make sure the washing machine is on a level floor. If the floor is
not level, use the levelling feet to adjust the washing machine.
•
Make sure the washing machine is not contacting any other object.
•
Make sure the laundry load is balanced.
•
Make sure the laundry is spread evenly in the washing machine.
Spread out the laundry evenly and start again.
•
Make sure the space around the washing machine is free of
objects.
•
Humming is produced normally during operation.
•
Objects such as coins can cause noise. Remove these objects from
the washing machine after washing is complete.
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the door, and then press or tap START/PAUSE to start the
washing machine. For your safety, the washing machine will not
spin unless the door is closed.
•
Before the washing machine starts to fill, it will make a series of
clicking noises to check the door lock, and then does a quick drain.
•
There may be a pause or soak period in the cycle. Wait briefly and
the washing machine may start.
•
Make sure the inlet hose filters at the taps are not clogged.
Periodically clean the filters. See page 50.
•
This problem can occur temporarily due to low voltage in your
household electrical system. It will be resolved when the voltage
returns to normal.
Action
2019-02-14
5:36:33
Publicité
