Panasonic Lumix DMW-MCTZ3 Mode D'emploi page 23

∫
About storage and inspection after use
≥
Always take the digital camera out of the Case.
≥
Make sure that no dirt or dust is stuck to the O-ring.
≥
Thoroughly dry the Case at room temperature and then store it in a cool, dark place.
≥
We recommend that the Case be inspected about 3 years after purchase. This
inspection involves dismantling and cleaning the Case, inspecting all the parts and
repairing them if necessary and checking the waterproofness of the Case using the
same hydrostatic test equipment that was used to check the waterproofness before
purchase. The customer is responsible for all transportation costs.
≥
Do not dismantle any parts or use any accessories not specified in these operating
instructions and do not alter the Case. If the Case does not work properly, consult
your dealer.
Specifications
Compatible model:
Mass:
Dimensions:
Material:
Waterproof construction: O-ring sealing
Water resistant depth:
* Refer to the operating instructions, catalogue, website etc. of the digital
camera for the latest information on models that can be used.
DMC-TZ2/DMC-TZ3 (As of March 2007
Approx. 430 g
Approx. 155 mm (W)k94 mm (H)k93 mm (D)
(excluding the projecting parts)
Polycarbonate
40 m
*
)
23
VQT1F26