Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Reset
Setting the water hardness
Rinse aid reservoir
Open the door of the dishwasher
The indicator of the program selected last is flashing.
Press and hold the programming button for more than 3 seconds.
The 'End Program' indicator is flashing. The indicator of the program
selected last turns off
Close the door of the dishwasher.
The machine pumps out for about 30 seconds. Following the end of
this, a sound signal will click 5 times and the indicator shows that the
program has finished.
Switch off the dishwasher with the on/off button.
Switch on the dishwasher with the on/off button.
Press the program button and keep it pressed until the indicators P1-
P2-P3-P4 and the indicator 'End program' light up and then turn off.
Set the desired water hardness by repeatedly pressing the program
button.
After selecting the desired setting, press the on/off button.
The set value is stored in the memory.
Rinse aid is added during the final rinse. Rinse aid prevents traces of water
droplets being left behind on the clean dishes. Moreover, it ensures that the
dishes dry quicker, since the water drains off more easily.
EN 11
Publicité
