Publicité
Les langues disponibles
Les langues disponibles
Using the Controls
To Activate Continuous Light:
Press Light pad again. The On indicator light will
illuminate.
To Deactivate Auto or Continuous Light:
Press the Light pad a third time. This will turn off the
dispenser and indicator light.
Door Alarm
The Door Alarm feature will alert you when one
of the doors has been left open for
approximately three minutes. When this happens, the
Door Alarm light will flash and an audible alarm will
sound.
To Activate:
Press the Door Alarm pad once. The Door Alarm
indicator light will illuminate.
To Deactivate:
Press the Door Alarm pad once. The indicator light will
go off.
To Turn Off the Audible Alarm:
Press the Door Alarm pad once or close the door.
Max Cool
The Max Cool feature is automatically
activated and the indicator light illuminates.
This feature provides the ability to cool down the
refrigerator and freezer after extended door openings
or when loading either compartment with warm food.
This feature causes the refrigerator and freezer
temperatures to drop to the minimum seetings on the
control. Important: When the Max Cool feature is in
operation, the
and
and Freezer controls will not operate.
To Activate:
Press the Max Cool pad once. The Max Cool indicator
light will illuminate.
To Deactivate:
Press the Max Cool pad once. The indicator light will
go off.
Max Cool will deactivate automatically after 2 hours.
User Preferences
Access the User Preferences menu to:
• Change the temperature display from °F to °C.
• Enable or disable audible alarms.
• Adjust the light level at which the Dispenser Auto
Light will illuminate when this feature is activated on
the ice and water dispenser.
11
pads for the Refrigerator
• Activate the Sabbath Mode.
To access the User Preferences menu, press and hold
the Door Alarm pad for three seconds. When in the
User Preferences mode, a short title for the feature will
appear in the Freezer temperature display and the
feature status will appear in the Refrigerator display.
1. Use the Freezer
through the features.
2. When the desired feature is displayed, use the
Refrigerator
and
status.
3. When changes are complete, press the Door Alarm
pad for three seconds OR close the Refrigerator
door.
Temperature Display (F_C)
Change the display to show temperatures in degrees
Fahrenheit or degrees Celsius.
Alarm (AL)
When the Alarm mode is off, all audible alarms will be
disabled until the feature is turned on.
Auto Light Level Selection (LL)
This setting adjusts the light level at which the
dispenser light will illuminate when the sensor detects
that the light levels in the room are low. Setting 1 is
the darkest light level setting, setting 9 is the brightest
light level setting. Important: The Auto Light must be
activated on the ice and water dispenser control to
take advantage of this option.
Sabbath Mode (SAb)
When the Sabbath Mode is on, all control lights,
interior lights, and the night light will be disabled until
the feature is turned off. Press the Door Alarm pad
for three seconds to restore the lights.
Notes:
• Dispenser light will not activate during dispensing
while in Sabbath Mode.
• If the power fails, the control will remain in
Sabbath Mode when power returns.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. This condition will be more noticeable when
the refrigerator is first started, during hot weather and
after excessive or lengthy door openings.
and
control to scroll
control to change the
Publicité
